LED driver  NFC SC EXC3 LC 14/28/38 W flexC

LED driver  NFC SC EXC3 LC 14/28/38 W flexC

The ideal retail solution

Beltrade

Depending on requirements, the new excite (EXC3) fixed-output driver is available as a non-dimmable or DALI-dimmable version with a dimming range from 1% to 100%. Both the flexC driver and the dimmable one4all design are equipped with an NFC interface. Tridonic therefore offers a complete NFC product portfolio in dimmable and non-dimmable versions for the retail sector. Optionally available as in-track solutions or with SC97 products.

In addition to enabling time-saving multi-programming of entire packing units, NFC allows the output current to be flexibly adjusted. For the dimmable version, this can alternatively be done via DALI. Thanks to the large operating window of 100 mA to 1,050 mA in output classes of 14 W to 38 W, the driver range covers a large spectrum of requirements. The driver can either be integrated directly into the luminaire or secured with a strain-relief clip-on set. With lumDATA, the dimmable drivers also comply with the latest DALI-2 parts for intelligent data usage.

Katalog

MSensor G3 PIR 4DPI WDA WH DALI Standard

MSensor G3 PIR 4DPI WDA WH DALI Standard

Wide detection area and IP54 protection

The DALI-2-certified motion and daylight sensor is particularly suitable for rooms with lower ceiling heights of up to 4 metres. A large selection of accessories gives the sensor a wide range of application. This also includes challenging environments such as cleanrooms, in which the sensor can function without any problems thanks to IP54 protection. Its small size enables simple, space-saving and unobtrusive integration into the luminaire. Because the sensor has a wide-angle detection area (WDA), it enables greater installation distances, with a significantly lower number of units thus required per room.

Product description

• Sensor developed to work with the latest DALI specification
• Monitoring of ambient light and motion detection
• Remote control interface allowing infrared remote control interaction
• Individual adjustment of the parameters with configuration software
• Power supply via DALI line
• Wide range of accessories allowing extended application range
• Small dimensions allowing easy and inconspicuous integration in luminaries
• 5 years guarantee

Housing properties

• Casing: polycarbonate, white
• Type of protection up to IP54

 Katalog

Beltrade

Eighth generation of modules: LED module SLE SNC8

Eighth generation of modules: LED module SLE SNC8

Uniform illumination and excellent colour rendering

The eighth generation of compact modules has been designed for spotlights and downlights with basic lighting tasks. The modules are available in the three sizes LES06, LS09 and LES15. Thanks to technical features such as Dam&Fill and COB technology, the modules provide uniform illumination and excellent thermal management throughout the product’s life time. As well as offering three colour temperatures, SLE SNC8 also features impressively high colour rendering of Ra > 80 or Ra > 90 and small colour tolerances (MacAdam 3).
Product page:
Module SLE SNC8

First certified LED driver for emergency lighting

First certified LED driver for emergency lighting

An updated version of DALI standard IEC 62386-202 was published in September 2021. This DALI-2 standard, also known as DALI-2 Emergency, extends the interoperability of self-contained emergency control gear. It also facilitates integration with building management systems which can access DALI control and querying capabilities including automated testing and reporting.
As an active member of the DALI Alliance, Tridonic has significantly contributed to the definition of the new standard. What is more, EM powerLED PRO LiFePO4 1-4W from Tridonic is the first LED driver for emergency lighting to be certified under the new standard. The product, scheduled to be launched in June 2022, thus ensures full compatibility with other DALI-2 lighting components.

For more information on DALI-2 Part 202 visit the website of the DALI Alliance.

Beltrade

What is protection class II?

What is protection class II?

Protection class II – protective insulation means protection through double or reinforced insulation, i.e., safe electrical separation.

Special features of SK II

Luminaires with protection class II have no connection to the protective conductor. Instead, there is reinforced or double insulation between the active and touchable parts. The following factors, among others, must be taken into account for luminaire manufacturers:

• Structure
• Creepage and clearance distances
• Insulation resistance
• Creepage resistance of the insulation materials used etc.

Which connectors may be used in luminaires with protection class II?

The following connectors from our range meet the requirements for insulation class II applications:

SLK 5 SKII

Dear Partners, we wish You Happy Easter !

Dear Partners, we wish You Happy Easter !

Let the prosperity and happiness host at You and your families.

Let this Holiday bring understanding, harmony and joy.

We wish You All the Best, let love and happiness remain forever.

Beltrade

Beltrade ACU SRL Connection Box

Beltrade ACU SRL Connection Box

New connection box with LINECT interface

For luminaires with connector systems.

Beltrade introducing New Product KADO HD

Beltrade introducing New Product KADO HD

Something big is coming!

New LED module LLE FLEX 48 V EXC

New LED module LLE FLEX 48 V EXC

Beltrade : LED strip with 48 V constant voltage

Lighting solutions of length with constant luminous flux

WE WISH YOU A MERRY CHRISTMAS !

WE WISH YOU A MERRY CHRISTMAS !

We wish You that the New Year 2022 bring You many lucrative contracts and many offers which open new profitable businesses. May all Your wishes and dreams come true with the chiming of the clocks at the midnight and each day of Your businesses will be successful. May every moment of Your life will be happy and unforgettable.

We wish you a Merry Christmas and a Happy New Year!

Beltrade